MALEKKO POWER 1.3

EuroRack Power Supply & Distribution Bus

Malekko Power for EuroRack has finally arrived! Utilizing a unique power architecture with switching power supplies cascaded to two pairs of linear regulators, it is designed for low noise and stability. With separate regulator pairs per output section, noisier modules can be isolated from the rest of your rig.

• 22 shrouded EuroRack power header outputs
• 4 Layer PCB with continuous ground plane
• +12V & -12V outputs at 2 Amps each
• +5V output at 1 Amp

Improvements in 1.3:

— Almost no heat generated at all, even at full load.

— +/-12V @ 1.6A increased to +/-12V @ 2.2A at least.

— +/-12V @ +/-5% tolerance improved to +/-1% tolerance

— Increased low noise and increased transient response performance (good for video!)

BOARD DIMENSIONS: 310MM x 84.99MM

DC POWER BRICK SPECIFICATIONS: 9-18VDC, 6Amps, 2.5mm Barrel Connector (Center Positive)

RECOMMENDED DC POWER BRICK:
CINCON ELECTRONICS, TRH100A120
12VDC 8.34Amps, 2.5mm Barrel Connector (Center Positive)

https://www.mouser.com/ProductDetail/Cincon/TRH100A120-02E12-Level-VI?qs=sGAEpiMZZMs1jjUfAXmXyrFWf%2FJhuYWUG0OEzobEXjcqf%252B7eoe1o8g%3D%3D

HI RES IMAGES:

FRONT

BACK