$200.00
We’ve built up a small handful of OG 616 MKII pedals in fancy hand-etched enclosures! Buffed out to a mirror finish, we call them EKKO 616 MKII Etched! So cool!
This run of 616 MKII analog delays is available only through our website and limited to 10 copies! Still on fire $200!
READ BELOW FOR MORE INFO!
THIS PRODUCT MAY BE AVAILABLE THROUGH ONE OF OUR AUTHORIZED DEALERS!
We’ve built up a small handful of OG 616 MKII pedals in fancy hand-etched enclosures! We call them EKKO 616 MKII Etched!
This run of 616 MKII analog delays is available only through our website and limited to 10 copies! Still on fire $200!
Each one is numbered and signed by Josh and Paul and includes some random curio in the box. Don’t ask- we don’t know!
Impress your friends!
International orders OK!
—
The EKKO 616 MKII specially voiced repeats allow a larger bandwidth to pass than most traditional analog delays. Turn the mix pot all the way up and the repeats will be slightly louder than the dry signal if needed, allowing greater flexibility. The regeneration pot will take you from a simple slapback to a nice gentle decay of a few repeats then all the way to taking off into outer space with just a turn of the pot! Engage the modulation button and it takes on a whole new personality, from subtle chorusing or beautiful vibrato to way WAY beyond. The EKKO 616 MKII also allows you to select your type of bypass between buffered or true bypass. Tired of annoying volume drops? An internal trimpot (labeled “gain”) will allow you to set the pedal’s level to your specific setup.
The EKKO 616 MKII additional features:
– The modulation range has been massaged to allow much finer tuning for a more balanced overall effect
– The MIX pot now allows louder effect levels
– Improved buffering circuit resulting in flat response and allows hotter inputs, which makes it great for keyboard or outboard use!
– Redesigned protection circuit for enhanced component safety
These changes add up to a cleaner, richer, sweeter, more flexible and musical analog delay.
Current draw is 50mA and operates on a 9V battery or optional 9VDC neg tip regulated power supply.
NOTE ABOUT OUR BYPASS CIRCUIT:
The bypass circuit is only active when the effect is off. Choosing buffered will light the LED; true is LED off.
If you have the buffered bypass circuit on and the LED goes out when you engage the effect, the pedal is working correctly.
| Weight | .7 lbs |
|---|---|
| Dimensions | 5.5 × 3.25 × 2.5 in |
